Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,I am trying to setup 802.1x port base authentication in the Cisco Cat.2950 switch. I use PEAP in a Windows XP client (authenticate by Windows AD username/password) and Cisco ACS 4.0 as the RADIUS authentication server. Everything is okay. Now,...
Hi all,We are using Cisco 1200 access point in our small retail shops and use some wireless heldheld devices to connect the wireless network. Since the shops are inside the shopping plaza, there are many other wireless access point which interference...
Dear all, We are using Cisco AP1231 Access Point in our office to provide the wireless LAN and we are using LEAP for authentication. Now, we would like to use WPA (with PEAP authentication) for the new notebooks. Is it possible for a single AP to use...
Dear all,We are using Cisco AP1231 Access Point in our office to provide the wireless LAN and we are using LEAP for authentication. Now, we would like to use WPA (with PEAP authentication) for the new notebooks. Is it possible for a single AP to use ...
Hi all,Our company just deploy the 6 x Cisco AP1010 with Cisco WLC 2000. In the WLC web console, I can see the user is connnecting to which AP in that moment. However, is there any way to trace the user assoicated to which AP yesterday? Thanks.Regard...
Hi Chad,Thank you of your information. FYI, I already setup the ACS, the wired notebook can be authenticated by AD account through 802.1x. My question is: I need to control users must use the Corporate notebooks to connect the switches (Corporate net...
Hi all,Thanks all of your information (especially Robert). FYI, our handhelds are only support 802.11b, so 802.11a cannot be used. Due to some limitation, the AP cannot be installed above the ceiling. The shapes of stores are in square. Robert,Do you...
Hi Roberto & Scott,Thanks of your response. I had already upgraded the Intel driver but the problem is still exist. However, I found that the problem may be related to the re-authentication. In the WLC, when I set the session timeout to 300sec (defau...
