Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I need to move from AP from WLCA to WLCB, I have try
#clear capwap private-config
#delete flash:private-multiple-fs
manually configure the new WLCB to the AP
clear all config
but none are working, it keep coming back to WLCA. I saw the log and noti...
Hello,
I plan to local switching 2 SSID by mapping to two local VLAN
Data SSID = WLAN_A
Device SSID = WLAN_B
Data VLAN = 10
Device VLAN = 20
But I don't plan to introduce new native VLAN for AP Management, will it work if I just use Data VLAN set a...
After AP successfully join WLC, I changed the IP to static, upon reboot, the AP just failed to join again.
example:ec:bd:1d:9b:be:84 is has static IP 172.31.2.101but the log show WLC fail to connect to different IP" AP disconnect
details- Reason for...
I feel you.
The whole process is ridiculous. I don't need to mention since you already mention most it.
This will add more pain if you company support is centralized and most of the work need to work remotely
I hope Cisco design more solution inst...
Hi George, thank you for you suggestion, I think somehow it help. I try with upper case this time because the system name is in upper case. it works ! thanks !
Hi Rasika, the issue solved. I'm not sure which command really fix it, but I think previously I did "capwap ap primary-base.." with WLC name in lower case, I try with upper case now it's working. but I repeat all the clear commands as well.
Thanks f...
