Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
1) What happens if all 3 cache engines fail?As far as I understand all traffic is forwarded directly to the Internet.Is there a way to block the normally redirected traffic?2) Do the "redirection hash table" on the 2 switches get syncronized?3) Are t...
I tried to copy a IOS via SCP from a WindowsXP-PC using WINSCP to a 1721. Login via SSH works ok.The "norton-commander" or "explorer" like" window never appears.Following output of debugs for:- Incoming SSH debugging is on- Incoming SCP debugging is ...
On a 3640 with an E1-connection we have about 300 logical dialer interfaces configured. Many of the commands are repetetive on each dialer interface, e.g.dialer pool 1dialer-group 1dialer hold-queueencapsulation pppppp authentication chapetc.Is there...
2 routers (R1 and R3) are connected via Frame-Relay running ISIS. On each router there is a loopback-interface configured also for ISIS.In the routing table on R3 I see the loopback from R1 as ISIS route and on R1 I see the loopback from R3. So far, ...
Thanks for your advise.Is it correct to do the "redistribute connected" on R3 in the OSPF process?That's the only way I got it working (see config below)I saw examples where the redistribute connected is done in ISIS. Can that be correct?R3interface ...
