Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Anyone ever here of this? I am getting thousands of ‘authentication failure’ traps at my NMS. The trap shows the source address of ‘0.0.0.0’ for the originator of the request (not the switch). I have tried to catch the offending device by using an...
Does anyone have a good source of information on the TDR function of the 3750? I need to document how to read the results and simply referring to a document seems to be the best approach. Thank you.
Thank you for the great answer. I will pursue this with Entuity. They have been great to work with - they should have a fix for me in a few days or so. This reminds me of what I often say, "any question is easy when you know the answer". Thanks a...
Some of my switches are running s72033-pk9sv-mz.122-18.SXD2.bin and the rest are running s72033-pk9sv-mz.122-17d.SXB6.bin all in native mode. My NMS is Entuity "Eye of the Storm" (EOTS). Below is a captured packet that was set to EOTS. Note the la...
Thanks for the link, but I have already seen this information. What I am looking for is something more like "when you see this it means XXX and you should look for this XXX or do this XXX". Is there anything out there? Thanks
This is normal.When the router boots it boots first to the image in the boot ROM. In your case 12.0(3)T. It then loads the configuration in NVRAM and looks for any boot environment veriables, such as system image, etc. If your saved configuration ...
There are a lot of things that you can do, some by yourself and some with the help of your service providor. Contrary to popular belief, your providor probably isn't screwing you on purpose. They may have some issues, but I bet they will work with ...
