Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Anyone know where I can download the VT advantage video drivers? They are not part of the installer package from the download site but are mentioned in the documentation.Regards
HelloI want to clarify if what we are seeing is behaviour by design. We have a remote site connected to main site with pixs creating a VPN tunnel;RemoteSite > PIXB > RouterB >WAN> RouterA > PIXA > MainSiteAs the two sites are tunneling there's no NAT...
Your IP address should be fine. You do not want to have the PIX connected to your LAN while you have the Linux firewall on as well as this will cause a conflict. Keep the PIX off the LAN for the moment. Your DNS setting will not have any effect as ...
The problem lies in the fact that the two networks are completely separate and you cannot run two networks on the outside interface. They have not extended his addressing but they allocated a new range, not very nice. I would like to hear if anyone...
Make sure your IP address in your PC is 192.168.1.x where x is another number except 1. Your should then be able to get to the PIX Device Manager using https://192.168.1.1.Remove yourself and your PIX from the network until you have your connection....
You can apply your access list by using an av-pair in the user attributes. The cisco-av-pair is:ipsec:inacl=111 where 111 is the access list defined on the router.Hope this helpsGary
