About vistalba

vistalba · 11-13-2020

Hi I want to replace my SG500-28 with the new SG350X-24P which is arrived today.Everything is working fine except two things. I run a NMS System on VLAN20 (10.10.0.0/24) which should monitor the Switch which is addressed in VLAN1 (192.168.1.0/24).I c...

vistalba · 12-25-2024

the question is more, why Cisco is not fixing the issue at all? As the issue exists since more than 1.5 years now.

vistalba · 12-24-2024

Could be that this makes sense for my case too.My Supermocro server is hosting multiple VMs. One of the VMs is a firewall which is providing IPv6 to the connected networks.

vistalba · 12-24-2024

As mentioned the issues seems to be SFP+ when the link comes up and the 2.5.9.x versions. So I just disconnected the SFP+ for downgrading. When SFP+ are disconnected the switch came up with 2.5.9.x normally.

vistalba · 12-24-2024

As long as I stay on Firmware version 2.5.8.15 the switch is booting normal with all Interfaces and SFP+ connected.As soon as I try a 2.5.9.x version the issue reappears. So currently I‘ve to stick on 2.5.8.15.

vistalba · 08-02-2023

I run into a similar issue as well. Connected are two supermicro servers with 10G SFP+s to the switch.After a power outage (servers shut down with UPS) the systems never came back up. I started with analysis and saw that the Switch SG350X-24P is in a...

Member Since	‎11-13-2020 12:52 AM
Date Last Visited
Posts	8

User Statistics

User Activity

SG350X-24P SNMP and ping from different network not working

Re: SG350X-24P - Crash with constant reboot with Firmware 2.5.9.16

Re: SG350X-24P - Crash with constant reboot with Firmware 2.5.9.16

Re: SG350X-24P - Crash with constant reboot with Firmware 2.5.9.16

Re: SG350X-24P - Crash with constant reboot with Firmware 2.5.9.16

Re: SG350X-24P - Crash with constant reboot with Firmware 2.5.9.16