About Jim McCormick

Jim McCormick · 06-06-2015

Hello,I've written two applets (see below). The first is triggered when a BGP route is removed from the table. The action is to send an email to the helpdesk. the second applet sends a second email when a route has been added to the BGP table (the as...

Jim McCormick · 06-14-2015

Another update Joe. I have updated the Lost Client Route applet per below. I added a 120 second wait and a maxrun of 150 seconds. I then added a match on "Network not in table". Lastly, I added an IF match then email, ELSE nothing. Testing was succes...

Jim McCormick · 06-13-2015

After posting the above Joe, I started going down testing down this route: event manager applet LOST_CLIENT_ROUTE event routing network 172.29.0.0/16 type remove protocol BGP le 24 maxrun 120 action 1.0 syslog msg "Client network $_routing_networ...

Jim McCormick · 06-12-2015

Thank you for responding Joe and thank you for providing the lab. As you can see from my above applets, I report on any 172.29.0.0/16 route removed from BGP. The clients in the MPLS cloud each comprise a 172.29.x.0/24. Some clients have multiple 172....

Member Since	‎06-06-2015 06:47 AM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	4

User Statistics

User Activity

EEM Applet - Delay sending of email alert on route removal

Another update Joe.

After posting the above Joe,

Thank you for responding Joe