About sam.c

sam.c · 11-01-2002

I have a 3620 w/ a T1 PRI to 24 mica digital modems. If i call the number, i get a fast-tone busy signal. Only fastethernet, serial1/0:23, Dial0 and Loopback0 are up, whereas Serial1/0:0-22, Group-Async1, Async1-24 are down.Attached is the config, i...

sam.c · 11-04-2002

The issue was resolve with cisco tech support and worldcomThe problem, as you mentioned above is indeed a telco issue. The D channel was not in-sync with Worldcom, even though reboot the router a few times didn't help. Turns out gotta do it at the s...

sam.c · 11-01-2002

Here's what i get from sh isdn status serial1/0:23lobal ISDN Switchtype = primary-5essISDN Serial1/0:23 interface dsl 0, interface ISDN Switchtype = primary-5ess Layer 1 Status: ACTIVE Layer 2 Status: TEI = 0, Ces = 1, SAPI...

Member Since	‎11-01-2002 12:36 PM
Date Last Visited	‎08-18-2017 03:50 AM
Posts	3

User Statistics

User Activity

Can't Dial-in via T1 PRI to 3620

Re: Can't Dial-in via T1 PRI to 3620

Re: Can't Dial-in via T1 PRI to 3620