Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello Community,it seems there are problems with dropped fragmented IPv4 UDP Multicast traffice on an ASA 5585X platform running ver. 8.4(6)5. The following sample topology has been used for the verification scenario:MC src and rcv (XChariot)|-----C4...
Hi all,have here a Hub 'n Spoke VPN topology between three Rtrs (where RtrB is the hub site), VPN tunnels are build up between RtrB-RtrA and RtrB-RtrC, EBGP peering is the same as the VPN topology(RtrB 2 RtrA and RtrB 2 RtrC). Now my problem: BGP com...
Hi all,have here a Hub 'n Spoke VPN topology between three Rtrs (where RtrB is the hub site), VPN tunnels are build up between RtrB-RtrA and RtrB-RtrC, EBGP peering is the same as the VPN topology(RtrB 2 RtrA and RtrB 2 RtrC). Now my problem: BGP com...
Hello Community,the following combination solved our problem for now, upgrade to ASA OS 9.1.3 (asa913-2-smp-k8.bin) and the change from virtual reassembly (default) to hardware reassembly -> global-cfg -> fragment reassembly full [interface].http://w...
Hello,as far I saw so far the Loop Guard feature is global. Depending on your switch platform/IOS version, you can try to use the Bridge Assurance feature as an alternative to STP LG. STP BA has to be enabled on a global level as well, but you afterw...
