Hello We need to upgrade our Cisco MDS9148S 16G 48 FC switches and connected to these we have Cisco MDS9100 IBM Blade switches Current NX-OS versionsMDS9148 - 6.2.159100 IBM - 5.2.8c Upgrade VersionsMDS9148 - 8.1.1a9100 IBM - 5.2.8i - appears this is...
I am having issues accessing resources on the inside network when connecting with Cisco client VPN to a Cisco ASA 5510 running 8.4(3) version of the IOS. I have tried all of the new 8.4 NAT commands but cannot access the inside net...
Guys....it is working now....thanks for all your commentsThe original site to site object group (SIte-to_SiteVPN1) was causing the issue as I had the full class A subnet specified for the site to site tunnelI changed this object group to;network-obje...
Thanks for your response, however the intercept-dhcp enable command did not resolve the issueWhen connected with the VPN client and running a ping from VPN host to inside network host, I get the following in the ASA logs but I do not get reply;May 23...
Thanks Rizwan - the L3 switch default gateway is 10.88.10.254....but good to double checkKevin - thanks for your reply also. I have now changed the NAT config to the below as you suggested;nat (inside,outside) source static RemoteNetwork4 RemoteNetwo...
