Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
FI : 6248Chassis : 5108Blades : B200 M2 x 2Uplinks : 5548UPI'm setting up a pretty standard UCS deployment and have VPC uplinks from the 6248 fab interconnects to Nexus 5548s. The uplinks appear to be working correctly as I can manage UCS without any...
Thanks Robert - that helps to clear things up. When I first set the FIs and loaded a server it was working fine and I see now that it was because I initially selected the simple wizard - even though I assigned a specific vlan (lets say vlan10, as in ...
Ok, so I came to a few realizations. Each of my vNIC templates only had a single VLAN on it, hence there was a one to one relationship between the vnic template, the vnics in the service profile template and the service profile vnics.I decided to exp...
That particular veth/vnic only needs vlan 998 on it - I've created the vnic templates to only allow one vlan for the time being.The nic profiles/templates are as simple as I could make them. Each one on only has a single vlan. Here is a picture of th...
Those both look correct to me (we have several other VPCs running on the 5548s as well). I've included some output from both the 5548 and 6248 below. Something else occurred to me .. as the vethernet interfaces are configured as trunks, the traffic a...
