Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
one telecom company is having 3640 router at one end & 1601 router at other end. for e1 connectivity they r using RAD FCD-E1 modems. in earlier configuration FCD-E1 modem has been configured for using 1 timeslot for data remaining 29 for voice. now c...
i have a client with 2x64 kbps links. i am not able use total 128 kbps while downloading or uploading. i just configured two ip's to serial ports & encap hdlc & default routing. can u suggest me to configure 128 kbps
hithe Modem MRO Tek RAD FCD-E1 model has that facility to divide some time slots to voice and some to data.we are using those modems. we are having 15 pairs of modems. earlier all are in 64 kbps means 1 time slot for data remaining for voice.now chan...
hi jackyoung. presently those router & modem are working with 64kbps configuration. i think there is no problem with serial portis there any need to give clock rate?any IOS upgrade will solve my problem?
those errors are came because of our trials for changing configuration & restarting of modem. the same configuration & modems working with 7206 & 1601 routers.
minimintu has given this solutionfirst of all create a multilink as: Router> enable Router# configure terminal Router(config)# interface multilink 1 Router(config-if)# ip address 192.168.205.42 255.255.255.252 Router(config-if)# ppp multilink interle...
