Hi, I am trying to establish a reverse telnet session from the aux port of 3845 router to another 6500 switch.Please suggest how I can do this,configuration assitance will be appreciated.thanksgagan
Hi Renato, You cannot get the patch via the bug toolkit, you need to contact the Cisco TAC (technical assistance center) to get the patch.Provide them the bug id.ThanksGagan
Hi, The no exec command allows you to disable the EXEC process for connections which may attempt to send unsolicited data to the router. (For example, the control port of a rack of modems attached to an auxiliary port of router.) When certain types...
Hi, Do we have a modem attached to this router if so please remove it and check its configurations.Please enter "no exec" command under aux port.Let me know if this helps.ThanksGagan
Hi, ACS software needs some permissions to be granted to it on the windows machine it is installed.Do verify the following:1.Acs is installed on the member server or DC and permissions are configured as per the following doc:http://www.cisco.com/un...
Hi All, This is a well known bug, associated with ACS installed on windows 2003 server.The bug id is CSCsb81671.This bug has a patch available which you can get from Cisco TAC.I hope this helps.ThanksGagan