Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Customer Query: Appreciate to check if it is possible to take CISCO devices backup through the Veeam backup solution (version 12).
My Answer: We can’t take backups of the configs directly to the veeam. The Veeam solution is being used mainly in the V...
We are running with the ISE PIC 2.6 version and now want to upgrade to the latest version to 3. x
Please provide the upgrade path from 2.6 to 3.3
version: 2.6.0.156patch 12PID: ISE-VM-K9VID: V01Serial Number: xxxxxxxxxAES-OS Version 3.0.5.144
Team,
Good Afternoon to you all.
We have recently configured EtherChannel between the Cisco and Huawei switch and it is not up but err-disable,
We tried to configure the command "spanning-tree bpdufilter enable" in the interface port channel and th...
We have VWLC installed and registered with 32 APs. I started to upgrade the VWLC to 8.10.185 and pre-downloaded the image to all the APs. When the VWLC upgrade page gives the message suggesting to pre-download the image to all APs and restart now aft...
We would like to request for an advice for the below vulnerability on Cisco Anyconnect :
https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-ac-csc-privesc-wx4U4Kw
Our current version info as below:
Cisco Anyconnect...
Dear Georg Pauwen
Thanks for your response., I spoke to the customer just now and hos response as below.
1. Backing up of all the Cisco switches (Nexus 5K, Catalyst 9K, 2k, and Cisco ISE, WLC, Cisco routers.
Simply I could say they want use Veeam to...
Dear Marce,
Now it is fine. This rebooted once when we kept it after uploading the code and pre-downloaded the code to all APs. We usually reboot the WLC immediately after the download but the customer asked to do it the next day morning with downtim...
Thank you so muchIt clearing says the version higher than 9.14 is need to support Latest Anyconnect client but you suggest to use the latest client with the same ASA image 9.14.(4).Please confirm again. ASA 9.14.(4) is the final version installed
