Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Folks,I am having some trouble with a UC520/CUE with a SIP Trunk Provider.The scenario is that we have the UC520 on our LAN with its F0/0 WAN port directly connected to a DMZ, with a public IP Address on the internet, and we have inbound/outbound ...
Hi all,Looking for some assitance here, as I have an issue that's driving me nuts.We have a campus network with a 4506 as the core with OM3 fibre links to dual distribution switches (one on the 4th floor of each wing, and one on the ground floor).The...
Did you copy all the GUI files into flash on the GNS3 Simulated router?Also are you browsing to http:///telephony_service.htmlIf you are not using the URL above, it will try to default to the HTTP configuration page of the router.HTHBill.
Hi Steve,Yes there is the Nokia E Series (E61/E61i/E65) that are both 802.11 WiFi GSM/3G. There is also the Nokia Intellisync Call Connect client application available for these Symbian OS Devices, that will let you run the phone as a "skinny" clien...
Hi, have you checked that the extended functions service is started and running (call forwarding issue). As far as the database is concerned, the only time I have seen this type of problem without databse replication issues was when we had to restor...
Try this, use a voice translation rule and a translation profile to do this. In the UK, I do it with the following commands. Note the use of the ISDN numbering plan parameters, that will prefix 90 to a local/national call and if the incoming call i...
