About jedolphi

jedolphi · 08-14-2023

Cisco Public Cisco SD-Access for Large Enterprise and Government Contents AuthorsExecutive SummaryChallenges and RequirementsSegmentationScaleConsistencyBYODAir GapIT as a Business (ITaaB)Managed Service ProvidersHow Cisco SD-Access R...

jedolphi · 07-08-2025

Hi @AlexanderHoer , there is no limit except for common sense e.g. dont make it a ring of 200. 10 or 20 would be fine.

jedolphi · 07-06-2025

Hi, it's derived from CDP, from the LAN Automation Deployment Guide, "The option to choose a peer seed interface is not available. Interfaces between peer seed and PnP agents are automatically inferred based on the topology information gathered from ...

jedolphi · 07-02-2025

Today LAN Automation configures MSDP for underlay AnyCast RP, this is the standard solution, so I'd suggest going with that. Perhaps better though, if there is no multicast configs on your original LAN Auto seeds (BNs in this case), you can start and...

jedolphi · 06-20-2025

Please do not manually assign IP addresses from the LAN Auto subnet, it has the potential to create a duplicate IP problem. Please use a different subnet for Anycast RP and inject that subnet into underlay ISIS.

jedolphi · 06-20-2025

If LAN Auto has concluded, then you will have to do it manually with template or on the CLI. If you prefer LAN Auto to have the ability to do this configuration on day N in future then please "Make a Wish" in the CatC UI and briefly explain the use c...

Member Since	‎10-09-2006 10:11 PM
Date Last Visited	‎07-02-2025 11:38 PM
Posts	471
Total Helpful Votes Received	641

User Statistics

User Activity

Cisco SD-Access for Large Enterprise and Government

Re: SDA: Edge node behind Edge node

Re: LAN automation for new fabric edge to dual-homed non-SVL border

Re: Layer 2 VLAN SD-Fabric

Re: Layer 2 VLAN SD-Fabric

Re: Layer 2 VLAN SD-Fabric