About bhaase

bhaase · 01-09-2003

I have two sites that are going to be connected via VPN with FXO cards on each side going to PBX's. Do I need to setup a gatekeeper or just setup the routers as gateways?? Also what IOS would be needed (The main office is a 2620 and the remote offi...

bhaase · 07-09-2003

What kind of errors are you seeing on both interfaces?

bhaase · 02-21-2003

That will work because the upstream router (your ISP) will still have /30 on their interface so when it sees a packet from a.b.c.3 it will treat is as a directed broadcast and not forward it on.

bhaase · 02-14-2003

Forget multilink PPP. CEF is the best way to implement load balancing in my experience. It is much simpler to setup.Check outhttp://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/switch_c/xcprt2/xcdcefc.htm

bhaase · 02-03-2003

GRE does not support MTU path discovery. You might want to check to see if you are blocking ICMP unreachable error messages "fragmentation needed" Type 3 Code 4Bryan

bhaase · 01-29-2003

Here is a FREE Windows based program that lets you backup Cisco router and switch configs and can even alert you when changes have occured.http://www.kiwisyslog.com/products.htm#cattoolsBryan

Member Since	‎11-11-2002 02:31 PM
Date Last Visited	‎08-18-2017 03:50 AM
Posts	32
Total Helpful Votes Received	1

User Statistics

User Activity

FXO config question

Re: Cisco 2950 Uplink problem

Re: squeezing an extra useable address from a /30 subnet

Re: Multiple T1 Lines

Re: Successive GRE Tunnels

Re: Backup script automation for Running Configurations