About nwest0010

nwest0010 · 02-24-2016

I have AnyConnect setup at two locations. There is a fiber point to point between the two locations and they can communicate across it with no issues locally. I want to be able to use AnyConnect to connect to Branch A and then also be able to access ...

nwest0010 · 02-16-2016

I have a Cisco 881 with a port forward for public RDP. I have setup a site to site VPN with a vendor of theirs from one specific host to a specific host on their end. They can ping our host but cannot RDP to it. If I remove the port forward for the P...

nwest0010 · 02-25-2016

Adding this fixed it. I am able to traverse both sides when connected via Anyconnect. Thank you so much!

nwest0010 · 02-25-2016

I apologize. I'm getting confused calling them A & B as well. Haha. I've fixed the uploaded configs.

nwest0010 · 02-25-2016

Here they are.

nwest0010 · 02-25-2016

I still cannot ping site B, but it also seems to have broken DNS. I could ping things on Site A but only by IP for some reason. Previously I could ping by name.

nwest0010 · 02-25-2016

I had tried these previously. I went ahead and put them back in there but I still cannot ping site B when connected to Site A.

Member Since	‎06-10-2015 07:45 AM
Date Last Visited	‎09-05-2018 06:51 AM
Posts	17

User Statistics

User Activity

Anyconnect to fiber site-to-site VPN destination

Cisco 881 Static NAT

So you are wanting me to

I apologize. I'm getting

Here they are.

I still cannot ping site B,

I had tried these previously.