About Michael Connelly

Michael Connelly · 05-08-2017

ISP provides a /26 public subnet with a gateway of x.x.x.129. We want to place either a router or L3 switch in front of the ISP router/switch and use it to manage the IP block provided by the ISP. Our goal is to place our own ASA and several severs ...

Michael Connelly · 05-09-2017

The server is a Microsoft DirectAccess server that we need to assign public IP addresses to in order to use Teredo and IP-HTTPS. If we NAT traffic for this server we are only able to use IP-HTTPS. The server has its own firewall so we do not want to ...

Michael Connelly · 05-08-2017

Forgive me, I see what you are saying. This is what I was originally planning, placing a L3 switch in the middle but then my inner paranoid voice said that his would not be a good thing to do, but to think of placing a router with an IOS firewall i...

Michael Connelly · 05-08-2017

Michael Connelly · 02-01-2012

Thank you Thomas, this has helped us to get our users connected using the AnyConnect Client (2.5.3046), however we now find that users cannot connect to the website on the router. Do you know where I can find out what version of the IOS we can run s...

Michael Connelly · 01-31-2012

So is the problem with the Cisco AnyConnect VPN client or with the IOS? Or is it both the Cisco AnyConnect client and the IOS? We are running AnyConnect 2.5.3055 and IOS 12.4T(24) on one of our ISRs and have not been able to get Windows XP SP3, Vist...

Member Since	‎11-29-2010 04:52 PM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	7

User Statistics

User Activity

Switching ISP provided subnet

The server is a Microsoft

Forgive me, I see what you

Close but not quite.

SSLVPN and Microsoft Security Update KB2585542

SSLVPN and Microsoft Security Update KB2585542