Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
ISP provides a /26 public subnet with a gateway of x.x.x.129.
We want to place either a router or L3 switch in front of the ISP router/switch and use it to manage the IP block provided by the ISP.
Our goal is to place our own ASA and several severs ...
The server is a Microsoft DirectAccess server that we need to assign public IP addresses to in order to use Teredo and IP-HTTPS. If we NAT traffic for this server we are only able to use IP-HTTPS. The server has its own firewall so we do not want to ...
Forgive me, I see what you are saying. This is what I was originally planning, placing a L3 switch in the middle but then my inner paranoid voice said that his would not be a good thing to do, but to think of placing a router with an IOS firewall i...
Thank you Thomas, this has helped us to get our users connected using the AnyConnect Client (2.5.3046), however we now find that users cannot connect to the website on the router. Do you know where I can find out what version of the IOS we can run s...
So is the problem with the Cisco AnyConnect VPN client or with the IOS? Or is it both the Cisco AnyConnect client and the IOS? We are running AnyConnect 2.5.3055 and IOS 12.4T(24) on one of our ISRs and have not been able to get Windows XP SP3, Vist...
