Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm about at my wits end here and hopefully someone here can help.I have a soho 77 ADSL Router that I've successfully configured to connect to my ISP using PPPOE.Connections go out from the LAN and come in from the Outside Network (Internet). All wel...
Hi;I have a soho-77 that I am using to replace the Speed Stream ADSL Modem from the ISP.I have a working config for DHCP and NAT but want to loose the NAT part and allow the clients on e0 to receive the Public IP addresses assigned from the ISP's DHC...
Hello Once Again.I'm wondering if this will work.On my 1720 I have a Dial-up ISDN line configured as a DDR backup for my Serial line (See Previous Post).All works well when I take the serial line down, the ISDN dials up the ISP and connects. I can pi...
Hello everyone.I'm trying to configure a 1720 with a ISDN backup for the serial line.I have int BRi0 set up like thisno ip address no ip directed-broadcast encapsulation ppp dialer rotary-grou...
Thanks for the explanation and link abinjola.I must've read that document a dozen times before posting up the question here. I think I need to really study how a PIX device works. It seems at times to be confusing in both explanation and implementati...
Ratings have been entered for your repsonses as they were on target and resolved the issue as I mentioned before.Can you tell me what those configuration additions actually did?Greg
Thanks abinjola for your answer. It worked like a charm. Now I just need to understand what it was you told me to do and what it did.I really like to learn about what I'm doing as opposed to just getting the answer.Thank you all too who also stepped ...
Thanks fellas, wow I thought I was the only one up and working at that time of night.I'll give abinjola's response's a try first as it doesn't involve a re-configuring both devices. I shouldn't think there is much more for me to do on the Router side...
