Hi;
I have a soho-77 that I am using to replace the Speed Stream ADSL Modem from the ISP.
I have a working config for DHCP and NAT but want to loose the NAT part and allow the clients on e0 to receive the Public IP addresses assigned from the ISP's DHCP server. This is so I can place my PIX Firewall behind the 77
TIA
Greg
Current configuration:
!
version 12.2
no service pad
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname Router
!
no logging buffered
!
ip subnet-zero
ip name-server 66.133.170.2
ip name-server 66.133.128.138
ip dhcp excluded-address 10.10.10.1
!
ip dhcp pool CLIENT
import all
network 10.10.10.0 255.255.255.0
default-router 10.10.10.1
lease 0 2
!
bridge irb
!
!
!
interface Ethernet0
ip address 10.10.10.1 255.255
ip nat inside
!
interface ATM0
no ip address
no atm ilmi-keepalive
pvc 0/35
encapsulation aal5snap
!
dsl operating-mode auto
bridge-group 1
hold-queue 224 in
!
interface BVI1
ip address dhcp client-id Ethernet0
ip nat outside
!
ip nat inside source list 102 interface BVI1 overload
ip classless
ip route 0.0.0.0 0.0.0.0 BVI1
ip http server
!
access-list 23 permit 10.10.10.0 0.0.0.255
access-list 102 permit ip 10.10.10.0 0.0.0.255 any
bridge 1 protocol ieee
bridge 1 route ip
!
line con 0
exec-timeout 120 0
transport input none
stopbits 1
line vty 0 4
access-class 23 in
exec-timeout 120 0
login local
length 0
!
scheduler max-task-time 5000
end
