About payne9446

payne9446 · 01-02-2018

I cannot find any way to limit "Local Label"allocation on a Router with multiple VRFs. I have LDP enabled on a single Tunnel interface and have a limit to mpls label range. Also, I have a prefix list specifying the global allocation under mpls ldp la...

payne9446 · 10-15-2007

Scenario: 2851 ISR with 2 VWIC-2MFT-T1 installed, one in WIC Slot 1 and the other in WIC Slot 2. Controller T1 0/1/0 is a PRI Voice only, 0/1/1 is DS0 CAS. ?network-clock-participate wic 1? and select 0/1/0 first the 0/1/1 second. This is so they can...

payne9446 · 01-02-2018

mpls label mode all-vrfs protocol bgp-vpnv4 per-vrfthis allocates an aggregate/"ALL VRFs" single local label for each VRF then mpls label mode vrf VRF-NAME protocol bgp-vpnv4 per-prefixthis allocates a unique local label for each prefix within vrf VR...

payne9446 · 01-12-2015

kego,I followed your steps for IOS XRv on ESXI meticulously but get connection failed using SecureCRT. I performed all steps to the letter.ESXI 5.5IOS XRv 5.2.2port 6001Seems pretty straight forward from your instructions. Any ideas?

payne9446 · 10-15-2007

As a rule of thumb I agree but in this case the PBX if supplying clock. I know usually each T1 data would be configured to take clock off of line but with bundlesMLF, MLPPP, etc. the providers are not all doing it that way. We several customers that ...

Member Since	‎11-16-2006 01:30 PM
Date Last Visited	‎03-30-2020 06:26 AM
Posts	4

User Statistics

User Activity

MPLS forwarding table "Local Label"

Multiple T1s in data bundle and Clocking Domain

Re: MPLS forwarding table "Local Label"

kego,I followed your steps

Re: Multiple T1s in data bundle and Clocking Domain