Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Good morning,
I added a Fabric aci on NDI cluster, but I can't figure out why the telemetry status is not ok
These are the ports I enabled on firewall
https tcp / dst: 443tcp tcp / dst: 111tcp tcp / dst: 9989tcp tcp / dst: 30000tcp tcp / dst: 8884tcp...
Hello,
I installed a pair of remote-leaf switches, they have 2 back-to-back 100Gb links. On ACI they are visible, but the interface status shows as "out of service" when I check from the CLI. I created the vPC domain, but it doesn’t work.
Eth1/33 and...
Hello,
I'm migrating configurations from IOS to IOSXR and I'm here to ask you how would you translate to IOS XR the configuration below:
interface TenGigabitEthernet6/2
switchport
switchport trunk encapsulation dot1q
switchport trunk allowed vlan ...
BLEAF-FO-01# iping -V mgmt:inb 172.22.21.140
PING 172.22.21.140 (172.22.21.140) from 10.134.32.34: 56 data bytes
64 bytes from 172.22.21.140: icmp_seq=0 ttl=59 time=0.766 ms
64 bytes from 172.22.21.140: icmp_seq=1 ttl=59 time=0.512 ms
64 bytes from 1...
thank you, but b2b of remote-leaf works just with fabric ports and they have LLDP enabled by default.Indeed lldp is working between them on eth1/33 and eth1/34
