About MartijndeLeur6342

MartijndeLeur6342 · 06-22-2023

Hello community, I have a Cisco switch C9300L-48UXG-4X and access points from the manufacturer Lancom model LX-6500 https://www.lancom-systems.de/produkte/wireless-lan/indoor-access-points/lancom-lx- 6500These products require IEEE 802.3bt (PoE++, 4P...

MartijndeLeur6342 · 06-22-2023

@MHM Cisco World wrote:Plesse remove the poe-ha Re-boot ap Share the below output Show power inline gx/x detail as requested: current port configuration: Log (terminal monitor) of AP at Startup:and also the information of show power inline ten 1/0/3...

MartijndeLeur6342 · 06-22-2023

@Leo Laohoo wrote:What firmware is the stack running on?factory default was (i think) 17.6.5 then i downgraded to 17.3.3 because there where some known issues about PoE. With both firmware Versions there was no difference so i updated to 17.9.3 but a...

MartijndeLeur6342 · 06-22-2023

@MHM Cisco World wrote:What is cable cat you use Min is cat5power inline port poe-ha <>check this command twice before apply it.interesting. Port configuration:interface TenGigabitEthernet1/0/39switchport trunk native vlan 50switchport trunk allowed ...

MartijndeLeur6342 · 06-22-2023

@MHM Cisco World wrote:What is cable cat you use Min is cat5as explained in my first post with the problem description i use 1,5m Cat. 6A S/FTP Cable to test the setup. When it finaly works i will use 1,5m Cat. 6A Patchcable from Switch to Patchpanel...

MartijndeLeur6342 · 06-22-2023

@MHM Cisco World wrote:Only the following UPOE switches are IEEE 802.3bt-complaint Type 3 devices:C9300-24UC9300-48UC9300-24UXC9300-48UXMC9300-48UNAccording to Cisco Catalyst 9300 Series Switches Data Sheet - Cisco also my used Model of Switch is UPO...

Member Since	‎02-24-2021 06:27 AM
Date Last Visited	‎10-04-2023 06:59 AM
Posts	8
Total Helpful Votes Received	5

User Statistics

User Activity

PoE Class 6 Cisco 9300L - Lancom AccessPoint

Re: PoE Class 6 Cisco 9300L - Lancom AccessPoint

Re: PoE Class 6 Cisco 9300L - Lancom AccessPoint

Re: PoE Class 6 Cisco 9300L - Lancom AccessPoint

Re: PoE Class 6 Cisco 9300L - Lancom AccessPoint

Re: PoE Class 6 Cisco 9300L - Lancom AccessPoint