Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Does anyone know if there is a method to change an aaa configured server from failed to active? For example I have two RSA servers configured as aaa servers on my ASA. I currently have a problem with the second one (sho aaa server shows it as failed)...
Hi all I seem to have a small issue with distributing into EIGRP.I have a 3550 switch running c3550-ipservices-mz.122-25.SEE.bin so I can run EIGRP on it - I have the following config (edited to leave only relevent parts)router eigrp 64 redistribute ...
On the switch where the redistribution is occuring:sho ip eigrp top 10.1.248.0 255.255.255.0IP-EIGRP (AS 64): Topology entry for 10.1.248.0/24 State is Passive, Query origin flag is 1, 0 Successor(s), FD is 4294967295 Routing Descriptor Blocks: 10...
Thanks for comming back Rick:I've probbably made it harder because I changed all the IP address for some bazaire reason. Anyway sho ip route 10.1.248.0/24 shows me:Routing entry for 10.1.248.0/24 Known via "static", distance 1, metric 0 Redistribut...
