About h2odata_ab

h2odata_ab · 09-08-2008

Hi there,I have 2 ASA 5520 running 8.0.3 in a failover configuration. I'm not great with the CLI so I tend to use ASDM most of the time. A while ago I did a backup of our configuration and noticed that it was 5 Mb! Previously it has been well below 1...

h2odata_ab · 03-05-2008

Hi there,I currently have a network which consists of one 2970G as a core switch and a number of 2950T and 2970G switches at the edge (see attachment 1.jpg).What I would like to accomplish is redundancy in the core so if one switch fails traffic will...

h2odata_ab · 02-21-2008

Hi there,I decided to setup two 2950T's that we weren't using at the the office to try some VLAN scenarios I had been pondering. I started by updating IOS in both switches and did a "write erase" to clear all configuration. I deleted vlan.dat as well...

h2odata_ab · 07-12-2007

Hi,I've never worked with an ASA (5520) before but have managed to get it up and running and have everything configured. Tunnels are running, DMZ is working etc. I set up a syslog server and what I'm struggling with now is what to log? I find it diff...

h2odata_ab · 09-09-2008

Thank for your answer Sushil. We're already running ASA 8.0.3 and ADSM 6.0.3. I'm assuming you don't want me to downgrade? I suppose I could manually edit the config but I would be happy if I can fix it without having to spend hours doing that.

h2odata_ab · 03-28-2008

I'm having the same problem. The CSC will also frequently hang for a few minutes when changing settings in the web interface. The product seems far from mature and has so far been very dissapointing.

h2odata_ab · 03-06-2008

Thank you Joseph. Some food for thought there. Etherchannels sounds like a good idea.

h2odata_ab · 03-05-2008

I was just told that manegement wants whatever gives us the most flexibility and uptime regardless of cost. What would suggest without going over the top? The facility consists of multiple buildings connected via 1 gigabit fiber. The most important i...

h2odata_ab · 03-05-2008

I don't know why you have spanning tree par vlan. Regarding your second question I haven't heard a specific number like 7 before for number of daisy chained switches. The reason you can't daisy chain an unlimited number of switches is latency. Every ...

Member Since	‎12-14-2006 01:15 AM
Date Last Visited	‎03-19-2021 12:01 AM
Posts	13

User Statistics

User Activity

ASA 5520 with duplicated remarks in the conf file

Network design question. Core redundancy.

Uplink problem between two 2950T switchers

What to log?

Re: ASA 5520 with duplicated remarks in the conf file

Re: CSC service module problem

Re: Network design question. Core redundancy.

Re: Network design question. Core redundancy.

Re: spanning tree