Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I have the following situation currently running a 2 node ISE cluster version 2.6. The hardware needs to be replaced by virtual appliance and would like to upgrade to version 3.1 in the mean time. I would also like to maintain current IP's.What ...
Hi,I have the following topology. The underlay is OSPF , overlay is EVPN BGP. Suppose I want to mirror all traffic going through the uplinks to a device connected to a leaf. Can i use ERSPAN for this?According to documentation ERSPAN over VXLAN ove...
Hi,I have the following questions can we run a HA link of firewall(Fortinet, Palo) over ACI multipod. Do we need to take any special considerations into account recording the ACI endpoint learning beheaviour? Frederik
Hi,I have the following questions can we run a HA link of firewall(Fortinet, Palo) over ACI multipod. Do we need to take any special considerations into account recording the ACI endpoint learning beheaviour? Frederik
Hello,I have the following topology. A backbone Area 0 and 2 different area's for WAN connections comming from ISP 1 and ISP2.The Fortinet is protecting traffic coming in and out to the remote sites (areas). Area 202 has Fortinet in (ABR) and 2 AS...
Hi Sergiu, Apologies for the late reply did not see your reaction. It is the last option I want:If it's the second (mirror all vxlan encapsulated traffic from all leafs to a device connected to one leaf) then yes this is not supported.For the first ...
Hi Mayday, the integration works the same as normall VMM integration so inside the fabric it will be VXLAN transport. The transport nodes will not use Genève as an underlay and You will have no edge nodes on NSX-T side. So you will only use firewall ...
Tnx Paul. "https://www.cisco.com/c/en/us/support/docs/ip/border-gateway-protocol-bgp/213285-understand-the-importance-of-bgp-weight.html" I have tried you solution after also reading the above article. It doesn't seem to work since I am using IBGP o...
