Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
HiI try to implement "Downloadable IP ACL" between 3560 (IOS 12.2(35)SE1) and An ACS Appliance 4.1.3.12 using Radius authentication of a user that want to connect on the switch.The authentication works fine and I can log to the switch without problem...
HelloI want to know if some GPO parameters can prevent computer authentication 802.1X ?Because we use ACS4.1 and 802.1X PEAP authentication with Vlan assignement and MACHINE authentication OnlyAnd certain PC works fine and other not And if we disconn...
HelloI have an appliance ACS v4.1 and I use 802.1X PEAP authentication.All work fine for PC which are 802.1X compliant with an external database Active DirectoryBut when you wan't to authenticate a non 802.1X device such as printer, the ACS log an "I...
HelloCould you tell me if its possible to do 802.1X authentication with LDAP server using PEAP MS-CHAP v2 (Machine autentication) ?in fact, with Windows external database, its work fine.We use only machine authentication with vlan assignement over PE...
HelloWhen i configure 802.1X with Vlan assignement, and mac authentication bypass not activate, the port go to VLAN Guest when the PC is shutdownHowever, yhen you configure 802.1 with vlan assignement and Mac authentication bypass activate, when the ...
HiI have try to implement the solution with cisco-av-pair but its don't work when i connect to the switch with a username create on the ACS.If you know if there is differents parameters to change ? on the ACS ? or on the Switch ?I have try to impleme...
Thanks for your help, I will try again to implement the solution with [009\001] cisco-av-pair.But I have try to do this the last time and it seems that don't work fine. but I will test another time.thanks
Thank you for your helpWe doing an Machine authentication only because is work fine under Windows XP and don't prevent GPO application on the login or other thinks...we work on this type of architecture under 3 workstations since few month without pr...
The CSAgent is installed on a Windows 2003 Server with SP2 and it's work fine because the most part of Computer account are correctly authenticate.The link between ACS and AD is do by an another server where the agent is installWhen you disconnect an...
HelloWhen i do the command csagent -v the result is:ACSRemoteAgent version 4.1(3.12)and I have an Appliance ACS:Cisco Secure ACS 4.1.3.12 Appliance Management Software 4.1.3.12 Appliance Base Image 4.1.1.4 CSA build 4.0.1.543.2 (Patch: 4_0_1_543) and...
