Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm completely stymied with what should be a very simple, basic configuration of an ASA 5505.I'm wanting to connect the ASA to a standard cable modem, provide the ASA with a single static IP address, provide DHCP services on the internal interface(s)...
Hello, everyone. I have a PIX VPN/firewall that works great for providing VPN access from behind other NAT'd firewalls (Apple AirPort, Cisco PIX), but when I try to VPN from behind a Linksys WRT54G (firmware 8.0.0.2), I can authenticate the IPSec co...
Hello, all. Here's the scenario: PIX 501 provides firewall/VPN services to office with the web/mail server on the inside. Mail and web work fine on the local LAN, and web and POP/IMAP work fine on the outside, but SMTP does not. It appears that al...
I have a PIX 501 firewalling a small network of six users. On the inside network is the server which provides file, web, email services for office.Normal outbound traffic works fine, and most traffic inbound to the web/email server works fine except...
I'm new to PIX firewalls and could use a bit of help. I've a PIX 501 that's been configured using the Startup Wizard and VPN Wizard. Internet connectivity is via PPPoE. All works fine with outbound traffic, and VPN works with remote access by clie...
Thanks for your reply. I'm not sure I fully understand your recommendation. I have information provided by the ISP for the static IP address, subnet mask and gateway router address. Are you saying that I need to add the gateway address to the outs...
The internal DNS server (also the file/web/mail server) already has "A" and "PTR" records for the server itself, though no MX records as all mail traffic has always gone outside and back in.The server's DNS servers in its network settings are first i...
