Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Cisco Forum,
I need some advise in regards to the best approach to follow. This is the scenario:
A Client has an ASA 9.1(7) 16 physical appliance (reaching the end of its life-cycle) that is purely used as a VPN gateway for both remote access ...
Hi Netpros,I have a situation where I need to bypass any inspection between two hosts. I currenlty have the IDSM-2 performing in-line VLAN pair. From reasons I can't currently detail I don't have access to the web interface and the...
Hi Netpros,I have a couple of questions and would appreciate your assistance.1.- Is there any limitation regarding the number of in-line VLAN pairs which can be monitored by the IDSM-2. Using the below version in the cat 6K. I need to monitor about...
Hi Netpros,I have just found that the 5.2 version of ACS does not support Dynamic IP allocation by using the IP pool feature which was available since I can remember. Any ideas whether this feature would be added in new releases? .. I am working on ...
Hi Netpros,I am migrating from ASA5550 (running 7.2(4)33) to 5580-20 and was intending to use the same version. A second phase of the project will include image upgrade. By looking at the image available for download from Cisco for the ASA5580 it onl...
Hi gents, I've followed this post. So do you know whether the Chassis Storage License N56128-128P-SSK9 is required in order to enable FC native on some of the ports in the fixed module? I understand the license is required for enabling FCoE .. what...
Hi ..Because we are talking about 300 SOHO sites which need to terminated on the VPN head end at the Head office. Imagine creating 300+ LAN 2 LAN tunnels manually. Unfortunately the customer has already purchased the Fortigate firewalls and therefore...
