Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Can the 1200 duel radio series be configured to allow one radio to act as a bridge and the other radio to act as a normal coverage AP? If not does cisco make an AP that can do this?
I I have about 10 2924 switch’s and two cat 4006 box’s I have also set up 10 Vlans that each switch is dedicated to, all the switch’s are connected physically back to a WS-x4124FX switching module in the 4006 and they are all trunked using dot1q. My...
I have two Cat4006 boxes one with a 4232 router module. I also have about 10 2924 switches all trunked together using dot1q with about 10 vlans set up, basically a router on a stick. What is the easiest way to set up a dhcp server, using the router, ...
I have two Cat4006 boxes, one with a WS–4232–L3 Router module and about ten 2924C switches, each in their own Vlan, all trunked together using 801.q. I’m trying to backup my configurations to a tftp server. I can do it with no problems from the 2900’...
As for as I can tell there is no default gateway on the 4006's but there is also no default gateway on the 2900's either. The Vlans are set up on sub interface's and I am able to route between them, however Vlan 1(Native) has no ip address set up on ...
