Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We recently migrated our VPN from a PIX based VPN to the VPN 3005 concentrator running software version 4.0. Our clients are all running version 4.0 of the client. Under our PIX setup, when users authenticated they were prompted for a username and ...
Several messages on this site point to peole using EAP on a Windows 2000 client and authenticating against an IAS server. I am running an Aironet 350 AP and trying to setup my Windows 2000 clients to use EAP only and authenticate against a Windows 2...
Thanks for the reply. If the domain is entered in the box the authorization request actually passes "domain/user" to the RADIUS server. If no domain is entered, only "user" is passed to the RADIUS server. So it definitely looks like there is still...
Stan,What type of access point are you running and what software revision is running on it? Are your clients Windows 2000 or Windows XP? Are you trying to authenticate against Microsoft's IAS server or Cisco's server? Are you planning on using dig...
EAP-TLS now working but PEAP is still not working.I was able to finally get EAP-TLS working. It turns out my CA was not setup issue certificates correctly. For those who are interested, here's what I did.1. On the client, Installed a certificate f...
Nilesh,Thank you for the information. I had been trying to use Cisco's LEAP with IAS because I was not able to get the host-based EAP option to show up in the ACU. After changing a dozen options and rebooting several times, I finally got the option...
Nagle,It looks like you are getting a little further than I am. Here's what appears in my logs:Authentication-Type = EAP-Type = Reason-Code = 18Reason = The specified authentication type is not supported on this system. It seems that no matter what...
