HejWe are seeing a weird behavior where ASR9006 sattellite (ASR9000-V2) is dropping packets on ingress.We tried many different combinations on the interface regarding vlan operations but it just keeps dropping packets coming from CPE side even if we ...
HejI am working on a QoS profile for MPLS Customers. where I limit overall port traffic with a Parent policy, then use Child policy to limit some of the DSCP values on ingress.For example: I limit Overall interface ingress BW to 100Mbps, and limit EF...
HejNCS5508 version 7.2.2I have been trying to apply MPP to our new devices, and was intending to use "apply-group" to shorten the configuration.I want to enable access only from Bundle-Ether interfaces and using the below wild card. (I have also used...
Thanks for the help I found the problem I had. I needed "." in the wildcard So instead of 'Bundle-Ether*' I needed to do 'Bundle-Ether.*' . A small thing but made it work. RP/0/RP0/CPU0:test4p1dk(config-mpp-inband)#do show mgmt-planeTue Apr 6 10:29:5...
I followed what you did step by step but it does not seem to work. 1) Created Group2) Configure interface under MGMT plane3) Apply Groupcontrol-plane
management-plane
inband
apply-group INBAND-MGMT
interface Bundle-Ether666
!
!I only se...
