Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi -I have a small issue with a small network. I have two servers and a LAN behind a 5505 in one vlan. The servers are natted/port forwarded out using the outside interface's public addressing.One server for sshOne server for http(s)Let's say the s...
I'm getting an odd error - running AnyConnect 2.5.3041 on load balanced ASA's hitting a that redirects to the load balance IP. However, whenever I first hit connect... I get a disconnect with the message " ost connection to vpn service reattaching.....
Jouni - Still getting an error for routing with no route to host. Routes are as follow - Result of the command: "sh route"Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - O...
jumora - Can you provide what the full statement should be? Following JouniForss it looked like packets would be allowed but then the same issue occurred. Thanks!
Hi Jouni - Running 9.1(1) softwareHere's the result of sh run nat for the affected server Result of the command: "sh run nat"nat (inside,outside) source static local_nets local_nat_pool destination static monitoring_network monitoring_network!object ...
Patrick - Try changing your default route to theASA/PIX outside interface where the VPN terminates - ie,you now have ip route 0.0.0.0 0.0.0.0 dhcp Try changing it to - In this example 192.XXX.XXX.XXX is your public IP for the outside interface of you...
In the DART logs, I am seeing the following - Now let's say my public IP for my load balance url is 192.168.1.164.... it shows up here in the first section that I censored as 164.168.1.192.... really confused. Anyconnect tries to hit the wrong IP, t...
