Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello all,I'm in the process of setting up a working VPN/Firewall setup on an 881W ISR. I have the firewall, NAT, and VPN working, and I'm able to connect remotely to my router. The problem I am having is that I none of my VPN cllients can connect ...
Hello all,I recently configured my 881W for dual SSID, and NATing to separate the VLAN traffic. Afterwards, I used Cisco Configuration Professional to configure the firewall for medium security, and then I tested it by connecting it to my U-Verse re...
I took some time away from this to do other things, but now have had the time to actually gett this working. Looks like I have it working finally. I can reach the stuff on the inside and I can also NAT to the internet now. Here is what I did:I cha...
Hello jcarvaja,I made the changes, and here is some sample output below. I tried web browsing with a VPN client, and I could not get to any websites, and there was NO output to the log when I tried to browse the web.<190>554579: 3725687: *May 20 01:...
Doing more digging it looks like the local crypto endpoint is the IP of my WAN DHCP interface (FastEthernet4) when I have ip unnumbered vlan1 specified under my VTI. Is this normal?interface Virtual-Template1 type tunnel ip unnumbered Vlan1 ip nat i...
