Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
snmpwalk -v 1 -c public <IP_ADDRESS_OF_THE_SWITCH>
or
snmpwalk -v 1 -c public <IP_ADDRESS_OF_THE_SWITCH> <OID>
For example, to pull zone information from MDS switch:
# snmpwalk -v 1 -c public <IP_ADDRESS_OF_THE_SWITCH> enterprises.9.9.294...
Steps to clear cfs lock.
1) "show cfs lock" to find out which cfs application and which switch holds the lock
Application: device-alias <--- find out the application that locks the cfs
Scope : Physical-fc
------------------------------------...
Get information
1) the hardware and software by using CLI command "show version"
2) get HBA pwwn from server or storage administrators [note 1] and create a table
VSANZone NameDevice TypeDevice pwwn10production_zone_1server (initiator) 20:11:12:...
Galen Guanlin Zhang is a certified, Data Center expert and Data Center Storage Networking Design Specialist with Cisco. In this video, Galen presents how to obtain, install, verify and back up license on NX-OS based systems including Nexus and MDS sw...
it will erase your password.if you don't want to erase every thing, what you can do is, open you configuration with notepad and put "no" in front of the configuration line. and then paste it to the switch under configuration mode
That's right. maily 2 parts to let systems know which vlan carry fcoe traffic1) on N5K side, need vlan fcoe vsan 202) on the CIMC's vHBA propertyspecify as the deault vlan
Looks to me SDX4102FL-C1-M is a valid 10G SFPHere are some thougts might help narrow down the problem1) was that working before; anything changed recently2) how many 10 G link you have, does that problem happen to 1 link or others also3) swap cable/s...
I am not clear about the fabric topolgy and what's the goal.Assuming you have a lab environment to test brocade ---(ISL)---MDS--(ISL)--Mc Data, and there are devices on all 3 switches need to talk to each other on one vsan, then you can use interop m...
