About Ola Dallokken

Ola Dallokken · 05-24-2012

Hi I have a deployment with DMM, SnS, and TCS and C90 Telepresence codec. The TCS is sending the live stream to the SnS server. The question is if it is possible to multicast that live event to the SnS clients, or is unicast the only option here? If ...

Ola Dallokken · 01-24-2014

HiTry this SRV record on your public DNS:_collab-edge._tls.example.com. SRV 10 10 8443 expressway.example.com.on the internal DNS server you can use:_cisco.uds._tcp.example.com. SRV 10 10 8443 ucm.example.com./Ola

Ola Dallokken · 12-10-2013

Hi PaulIn the calls when the C40 is not showing any video, can you confirm that the media from the Polycom endpoint reaches the C40? Intermittent problems like you are describing are often caused by firewalls, and if you could describe the call setup...

Ola Dallokken · 08-02-2013

HiYour statements seems to be correct. Use no encryption since TLS needs Enhanced OCS. Media encryption in Lync is set to support encryption. Yes, without the key, you will not get media encryption. If you have Lync clients registered via an Edge se...

Profile 55" Dual Installation · 08-01-2013

HiYou can place the floor stand as close to the wall as possible. This will give you a 12,1 cm. space between the screens and the wall, which is sufficient. Ola

Member Since	‎04-12-2012 04:00 AM
Date Last Visited	‎08-08-2018 12:02 AM
Posts	6
Total Helpful Votes Received	5

User Statistics

User Activity

Multicast Show and Share live event from TCS

Expressway problem with Jabber client

No video when connecting Cisco EP & Polycom EP with H.264

Re: Integrate VCS (B2BUA) with Lync 2010 without some licenses

Profile 55" Dual Installation