Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Chris,Is zone-alarm installed on the faulty PC?Try to restart Cisco VPN-service and launch the vpn-client.I remember having a similar problem w/ Cisco VPN-Client. Some conflictual between VPN-client and Zone-Alarm installed on same PC.The problem ...
Check for incoming icmp log from hosts configured on the pix. Could be- a misconfigured server the pix cannot reach- a patch not well applied on syslog-server or snmp-server.- misconfgured pix eg wrong ip server-address,- port udp/514 not opened on s...
ACL is correct.You will also have add this route to your pix config:route outside 10.183.158.128 255.255.255.128 otherwise your route inside 10.183.0.0/16 will take precedence.
Last ACL is correct. This will encrypt traffic from net-A range 10.183.168.0-127 to net-B 10.183.170.0-127May I suggest this link referring to subnet calculation:http://www.cisco.com/cgi-bin/Support/IpSubnet/subnets.plor the complete tables:http://ww...
The mask on acl 101 looks truncated on this email. I'll suppose the ACL isAccess-list 101 permit ip 10.183.158.0 255.255.255.128 10.183.158.0 255.255.255.240 and you want 128 host on net-A to reach 15 hosts on net-B.(IF I'm wrong do not read the foll...
