Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,I have a site to site VPN, with site A being 172.16.1.x and site B being 172.16.2.x.Site B also has DMZs 192.168.1.x, 192.168.2.x, 192.168.3.x and 192.168.4.x.The site to site VPN works as expected, but I would like users in site A to be able ...
All,I've been using the Aladdin eToken with the Cisco VPN client for sometime and have been very happy with it.We are planning to add WebVPN to the services we offer to our remote workers - does anyone have any experience with the eToken and WebVPN?I...
Hi all,I have a VPN Concentrator 3005 and a large number of remote workers using the 4.6 series client.None of them have any issues, except one new supplier who needs to offer remote support. They connect, their certificate is authenticated and their...
All,Is anyone aware of a suggested or recommended method for upgrading a pair of 515Es in a failover configuration?In the light of http://www.cisco.com/warp/public/707/cisco-sa-20051114-ipsec.shtml it seems unlikely I'm the first person to want to do...
All,Can I arrange to send a call directly to hold when the destination line is currently busy?This is intended to be used at reception, rather than letting the line ring for an extended period (as though we don't care for the call) or sending it to v...
Sorry, but having read through this all I see is information on creating various site-to-site VPNs to connect internal networks - which I already have working here.I didn't see anything regarding accessing the DMZs of the remote PIXs, did I miss some...
First off, apologies for the delayed response - I've been off site for a while.Thanks for the advice, I have no reason to use the Attendant Console and would much rather prefer to use CM4 to configure groups.Do I need to take another route to do this...
Thanks for this, and yes - removing it as you said from the Route Plan has made it possible to create the hunt group normally. However...The group still fails to work, calling 1234 internally gives the call failed tone, externally I am told the numbe...
