Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I have Cisco ASA5510 ,and configured the interface 0/0 as a OUTSIDE and assigned an IP address,interface 0/1 is assigned as a INSIDE and assigned an IP address,I have configured the interface 0/3 as a DMZ ,and assigned an IP address and NATTING an...
Hi,I have 8 stories,I have 3COM L3 swtch as the core placed at the 4th Floor,all the floors are having 3COM L2 manageable edge switchs connected to the 3COM CORE switch.There is no core level redundancy.Now the end user wants to replace the existing ...
Hi,I have WLC 2112 connected to a core switch,that port is configured as a TRUNK port,then the AP 1142 is connected to a Access switch,that port is configured as a Access Port.Now in this case the APs are not getting the IP address and not getting as...
Hi I am using a WLC 2112 and LWAPs,I am facing the following problem.1. APs are getting associated with WLC,getting the dynamic IP from the DHCP server,but APs RF is not coming up,When I see the Monitor,it shows the APs but RF both 11a/g and 11b/g sh...
Hi,Please kindly look into the attached file,and suggest me how to achieve the internet access for the Branch users through the head office proxy server,using ASA 5510 firewall at Head Office and TZ-170 Sonicwall at Branch office,for your information...
1 Have you allowed the vlan in the trunk Yes I have allowed all VLANs for time being.2 Controller are you tagging the managment vlan or are you using 0? Yes configured as " 0 ".3 Is your trunk config with the native vlan statement? This I will have t...
Hi Raj,Thank you for your support.FYI.I am having UR license as a Primary PIX and Secondary is having teh FO license.secondly this is not covered under cisco support,customer is not willing to go for SMARTNET now.Now I have removed all teh FAILOVER c...
