Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We are unsing CCM v 6.0 , where in skinny regsiter/register ack messages have protocolversion field, but wireshark/ethereal captures are unable to decode these newly added fields..Is there any tool using which i can decode these fields ??
We have ccme v 4.1 , our 7937 phones are unable to get regsitered to ccme, is ccme v 4.1 support 7937..If not if i upgrade ccme to latest 4.2 version will it support 7937..Is there any workaround to regsiter 7937 to ccme
We have ccm 6.0 , i can access it through shell by default root access.Where can I find XMLDEFAULT.cnf.xml and other SEPXXXX.cnf.xml files , in which location.I would like to copy the XMLdefault file to external tftp server .
Are 3560 and 3560G are these layer3 switches ???One more thing can we create vtp trunk between fe port on 3560 and ge port on 3560g ?? to do intervlan routing..Thanks in advance
No this is not what i want ??Again let me let me explain my requirementBasically I want this vlan/dhcp setup for IP Phones ?in switch2vlan 10 has 172.21.67.145 255.255.255.248vlan 11 has 172.21.67.201 255.255.255.248 If i connect a pc to each vlan an...
thanks now the vlans created in server are getting rpopogated to client..but still routing is the issue ..in 3560G-vtp clint i have vlan1 where all ge port by default are present and it has ip dhcp..they all are in subnet 255.255.255.0 of 172.21.67.1...
still i am unable to ping from one switch to other this is my vtp status on clientVTP Version : 2Configuration Revision : 0Maximum VLANs supported locally : 1005Number of existing VLANs : 6VTP Operating Mode ...
thanksmy configuration on 3560 is vlan10 with ip address 172.21.67.145 255.255.255.248vlan 11 with ip address 172.21.67.201 255.255.255.248i have enabled ip routing I am able to communicate(ping) between vlansI have created vtp trunk encapsulation ...
