Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Another thing to keep in mind (depends on where you are geographically and who your telco is) is that you may have to add/change SPIDs. Your telco should (hopefully) give you this info when you expand the line though.
Your provider will hopefully allow you to announce your /22s to them with the no-export community. You then MED (set the metric) these prefixes depending on what the speed of that 'office' is. You also continue to announce your /20 with no communit...
Well, without knowing the specifics of the adapter teaming scheme (and vendor, os, etc) I can't really say. However you really don't need to worry about spanning tree as these aren't switches (spanning tree speaking bridges) but rather end devices. ...
In my experience SBFC + multicast addresses does not work at all if you use HSRP. Here is the solution we use:-HSRP on your routers, nothing special.-Use unicast addresses on the SBFC side. The downside to this is that you will only be able to reac...
