Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have one financial application, Whose SERVER sends L2/L3 BCAST (VLAN05) to the CLIENT (VLAN03) to communicate. We have only few CLIENTS on that SUBNET (vlan03) who really needs these BCAST from SERVER (VLAN05) but it is being recieved by all other...
My question is do we have avaialble BW on the egress uplink port (2 Gbps) of the CAT4003 to support 75 users (100Mbps-Full/User=7.5Gbps) ??? OR I have to implement QoS on that?---We have few CAT4003 (CATOS v6.3-3a, Pure L2 switch, No L3 Engine) ---Le...
What below message does mean?---------------ny-sw10a> (enable) 2002 Dec 19 14:09:50 %PAGP-5-PORTFROMSTP:Port 2/4 left bridge port 2/42002 Dec 19 14:09:50 %DTP-5-NONVLAN2PORTON:Port 2/4 has become a nonvlan2-access port2002 Dec 19 14:09:52 %DTP-5-VLAN...
I have IP Phone connected to CAT4003-ver6.1--------------------------------------------------------------------------------------------------- ingress egressPC<---------------...
Does CAT6509 pass VLAN header received from the SOURCE-SPAN port (dot1q trunk port) to the DEST-SPAN port (dot1q trunk port) if both SOURCE-SPAN and DEST-SPAN ports belongs to same VLAN?Setup:2 Source-SPAN ports: 6/42 adn 6/43 - 100bTFull- VLAN100-do...
Aruna,I believe you are taking about 802.1p/Q, Not 802.11b. If it is 802.11 wless then you got an ans from PATEL. 802.1p/Q (Priority/Trunk) is exclusiely supported by Avaya. (L2 COS). "ch ip-network-region x", where x is the net region.Hope that help...
Thank you SIR.....U'r the Man...***As you are in the loop...I had posted related question yesterday *** Could you Pl answer that quickly....So I can be sure What I'm doing. ====Q::: DSTIP=255.255.255.255, Does it get to NATIVE and AUX VLAN? Jan 6, 2...
Once again Thx a lot! *** Our Fin App does not support any MCAST, Server strictly/explictly sends L2 broadcast address (FF:FF:FF:FF:FF:FF) /L3 broadcast (255.255.255.255) to its CLIENTS while exchanging information. ***I guess in this case your solut...
All,---Finally i got it worked.---SPAN dest port/s has to be in the different VLAN form the source SPA port that you want to Sniff. For example: If you want to moirror source ports 6/42 and 6/43 (TRUNK) ports of VLAN 99 TO the SPAN dest (TRUNK) port ...
