Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi thereI have a problem with my AP. Basically when I plug it in to the PoE switch it will start up (I can see the lights) but for some reason there is no light on the PoE switch. Looks like there is nothing connected. I chave changed the cable, port...
Hi thereI have a problem with our WLC 2100 series (2125). Basycally internal DHCP server configured on WLC is not working. I have one AP connected to port no 7 (PoE) to bypass and eliminate problem with other equipment.Port no 7 details:IP Address: 1...
Hi thereThe PoE switch and the cable is fine as I plugged another AP to the same cable and it works (green light on the PoE switch). As I said I am able to console to AP and I can see that all is working fine but the protocol for FastEthernet port i...
I have not tried this. I can console to the AP and the FastEthernet port is UP but protocol is DOWN but still... there should be a light on the switch...Every single AP (I have 14 of them) once I plugget to the PoE in a second I have orange light wic...
Hi GuysI have upgraded IOS on the controller to 7.0.116.0 version. I have reconfigured it again. I am also using PeE 8 port switch (no VLANs).Controller is connected on port 3 to the PoE switch.Port 3 is my AP-MAnager port with the config as follow:1...
