Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Here is what I am trying to accomplish:I have a Guest SSID on its own VLAN, a Office Data SSID on its own VLAN, and a Voice SSID on its own VLAN. None broadcast.I authenticated my desired clients to both the Office Data and Voice clients by MAC authe...
I'm a little confused about doing a translation using static identitiy NAT.I have a prorietary router that I would like to move behind my firewall (ASA 8.2x). Right now it runs in parallel with my router from a DMZ switch. I have change ISPs and the ...
I want to create a couple of non-routable VLANs that will be trunked across multiple switches. These VLANs will reside on the outside of my firewall. In fact they will connect my firewall(s) to their respective ISP device(s). Is this a typical config...
To configure a reliable static backup route between two routers we control.Both RTR IOS are same at 12.4.x1. The wirless is the primary link (Uses FastEth0/x) on both RTR 1 and 22. The T1 is secondary (Uses Serial0/0/0:x) on both RTR 1 and 23. Wb 1 (...
Basically I want to take ports from my switch and create a VLAN that is not accessable from the other VLANs nor from layer 2 traffic from the other ports. I only need the devices to communicate with each other. I basically want to create a 2 or 3 por...
Ok. lets try another picture. Hopefully the formatting will hold.ISP #1-------Switch A port 4 vlan 98 (non routable)FW #1-------Switch A port 5 vlan 98 (non routeble)FW #1-------Switch A port 2 vlan 1 (routable) Switch A port 25 ---- trunk (all Vl...
I apologize that the diagram is not clear. Assume that the "core" switch includes all of my distribution/access switches and all vlans that traverse it are trunked. One switch in building A has 2 ports assigned to VLAN 98 which is non-routable and ex...
Some addtional information when performa a test failure on the RTR1 tracked objectRTR2#sh trackTrack 123 Response Time Reporter 1 reachability Reachability is Down 18 changes, last change 00:13:35 Latest operation return code: Timeout Tracked ...
