Call manager 6.1, 1 publisher, 3 subscibers 10 VG224 26 ATA's 600 phones Unity 5.0 w/ Exchange Integration UCCX Enhanced 5.0 Please send resume to agil.infotech@gmail.com with VOIP CONTRACTOR in the subject line Many thanks, Armando ... View more

POST : cisco WS-C6509-E (R7000) processor (revision 1.5) with 458720K/65536K bytes of memory. Processor board ID SMG1403N01E SR71000 CPU at 600Mhz, Implementation 0x504, Rev 1.2, 512KB L2 Cache Last reset from s/w reset 1 Virtual Ethernet interface 188 Gigabit Ethernet interfaces 2 Ten Gigabit Ethernet interfaces 1917K bytes of non-volatile configuration memory. 8192K bytes of packet buffer memory. The sh tech or sh ip int brief do not show any TenGigabitEthernet interfaces. Here are the modules: Router#sh module Mod Ports Card Type                              Model              --- ----- -------------------------------------- ------------------   1   24  CEF720 24 port 1000mb SFP              WS-X6724-SFP         2   16  SFM-capable 16 port 1000mb GBIC        WS-X6516A-GBIC       3   48  CEF720 48 port 10/100/1000mb Ethernet  WS-X6748-GE-TX       4   48  CEF720 48 port 10/100/1000mb Ethernet  WS-X6748-GE-TX       5    2  Supervisor Engine 720 (Active)         WS-SUP720-3B         6    2  Supervisor Engine 720 (Cold)           WS-SUP720-3B         7    1  Application Control Engine Module      ACE10-6500-K9        8    1  Application Control Engine Module      ACE10-6500-K9        9   48  CEF720 48 port 10/100/1000mb Ethernet  WS-X6748-GE-TX    Why does the POST show "2 Ten Gigabit Ethernet interfaces"? Which ports are 10gb? ... View more

WS-SUP720-3B, WS-X6724-SFP, WS-X6516A-GBIC ... View more

I'd like to utilize the 10gb port on the HP flex-10 to connect to my 6509-E. On the 6509-E, I have dual WS-SUP720-3B with a WS-x6516a-GBIC module. Is it possible? If so, what will be required. Many Thanks, AG ... View more

Existing enviroment: primary site presently has a data center 100 feet away. There are 12 fiber strands coming from the primary site to the dc.  Presently there's a 3560 switch stack in the dc. There's 2 6509 core's at the primary site. Each core switch has six fiber connections on each dedicated for the dc. The primary site and the dc are currently connected with a fiber port-channeled configuration. A majority of the equipment at the dc are windows servers. All data, one phone, no video. Task: remove the 3560 switch stack and deploy two 6509's (1 dual sup32, 1 dual sup720 w/ dual ACE10-6500-K9 mod and keep the existing subnets in effort to not re-ip all servers. For redundancy, purchased dual power supplies and dual sup's.  We'd like to have a configuration on the dc switches (new 6509's) were we can take on an entire switch failure and be able to stay up utilizing the other.  Load-balance where possible. Im pursuing any insight on configuration/design recommendations and/or feedback for this task.  Let me know if you need any clarity. Thanks! ... View more