Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello!
You can check:
1.Please check the reachability from the border control plane node to the inflobox server
2.On the edge uplink and border control plane node uplink please confirm if the DISCOVER is forwarded.
3.Also verify the infoblox receives...
Hello! based on the scenario there are a couple of things which can be checked some of the most common ones being:
a.Make sure the ip pool is assigned to the correct VN/VRF.
b.Verify the configs on the border control plane node and the edge nodes.
c....
Sure ! The Anycast Gateway in SDA provides a consistent default gateway IP for clients across all Edge Nodes within a Virtual Network (VN) helping in seamless client mobility.Clients keep the same gateway IP as they move, which ensures stable DHCP be...
You can take a packet capture on the edge node and confirm if the DISCOVER packets are getting forwarded.Also you cna check on the DHCP server through the logs or captures if DISCOVER is hitting the packet and verify the behaviour.
Thanks for the question!
DNAC auto-configures the ip helper-address on the SVI (Anycast Gateway) of each Edge Node.
When you assign a Virtual Network and define a DHCP server in DNAC, it pushes that config during provisioning
No manual config needed ...
