Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Similar to @ajcruz, my proxmox server was configured with a vlan-aware bridge using a single physical interfaces. In my case, "vmbr1" with Vlan IDs "20 41". VM ID =102. These values worked for me:args: -netdev type=tap,id=net0,ifname=tap102i0,scri...
Yes, for a Catalyst 9606 VSS pair v16.12.02 with span configured with source(s) and destination(s) which are on the different chassis, the span traffic is forwarded across the VSL link. We just troubleshot significant drops on a 4x10Gbps VSL and a s...
FYIY, you can add ports of different speeds to a portchannel, but one switch will suspend/shut the new port with an error message: "%EC-5-CANNOT_BUNDLE2: Te1/23 is not compatible with Te2/6 and will be suspended (speed of Te1/23 is 10G, Te2/6 is 1000...
