Hello Kindly helpI can access this Router from its WAN Side Gi0/0/1 through public ip but i can not reach it through LAN (Gi0/0/0)even the Immediate device(switch) does not connect on sfp yet i see the interfaces are up see config| Welcome!
| YUMBE ...
Hi I am failing to access the router through Web UI, SSH and Telnet on both LAN and WAN portBellow is the configAttention!
Authorized Access only.
Yumbe-Hospital>
*Jan 17 15:08:27.991: %SEC_LOGIN-5-LOGIN_SUCCESS: Login Success [user: ] [Source: LOCA...
Hello Kindly assistI cant access the router via web uiBellow is the configYumbe-Hospital#sh run
Building configuration...
Current configuration : 7079 bytes
!
! Last configuration change at 16:34:59 UTC Mon Jan 17 2022
! NVRAM config last updated a...
Hello, I want to access a PaBx (172.16.0.86) so I tried to do port forwarding for it in Isr4221 but still can't reach it. When I do port check on the public ip, it still shows that the port(80) is closed.What more should I do.
@Georg Pauwen not successful yet YH-Cisco-Router#sh ip nat translation
Pro Inside global Inside local Outside local Outside global
tcp X.X.X.X:443 172.16.0.254:443 --- ---
udp X.X.X.X:80 172....
I have also forwarded it on udp but still the same problemYH-Cisco-Router#show ip nat portblock pat global
tcp:
80 rfcnt 1
udp:
80 rfcnt 1
YH-Cisco-Router#